Why a video looks pixelated
A pixelated video shows visible squares instead of smooth detail. Most of the time it has one of three causes. The first is that the video has too few pixels: a small video shown on a large screen is stretched, and the stretching shows as soft, blocky edges. The second is compression: a video is stored in blocks, and when the file is saved at a very low quality or bitrate, the blocks show, especially in dark areas, in smooth gradients and in fast movement. The third is repeated compression: every time a video is saved and uploaded again, it loses a little more.
A fourth cause is not in the file at all. A video that is streaming over a slow connection can drop to a low quality for a moment and look pixelated, although the file is fine. Telling the two apart is the first step.
First check whether it is only playback
Before you try to repair anything, find out whether the file is really blocky. Play it from your own device, not from a stream, and see whether the blocks are still there. If the video is sharp on your device but blocky online, the platform or the connection is the cause, and the fix is a better connection, a pause that lets it buffer, or a download of the original file.
If the video is blocky on your own device too, the file itself has the problem, and the next steps apply.
Go back to a better file
The best repair is a better source. Look for the original recording on your camera or phone, in an editing project or in a cloud folder, because every copy that was shared, messaged or downloaded may have been compressed more. If you can open the project the video came from, export it again at the size it was made in and with a higher quality or bitrate than before.
Avoid saving the same video again and again. Each export from an already compressed file adds a new layer of blocks on top of the old one. Work from the first file and export once.
When you send a video to someone, send the file itself, for example through a link to a cloud folder, instead of through a messaging app, because many apps shrink and compress a video on the way. If you shoot video often, record at the highest quality your device allows and keep the original files, so that you always have something to go back to.
What filters and editors can do
Some editors have a denoise or a deblocking option, and a light one can soften the squares so that they are less noticeable. It softens; it does not bring detail back. Used too strongly, it makes faces and text look like plastic. Try a small amount on a short piece first, and compare it with the original.
If your problem is only that the video is small, you can show it smaller or in a window that matches its size. A small video shown at its own size looks much better than the same video stretched across a large screen.
What the FlowPix video upscaler does
FlowPix has a video upscaler. You upload a video, say the size you want, which is 1080p, 2K or 4K, and the result comes back as another video. It takes videos up to 60 seconds at 1080p, 40 seconds at 2K and 20 seconds at 4K, as MP4, MOV or WebM, up to 100 MB. There is a standard mode and a higher-quality mode that uses a finer model and costs more. It is charged by the seconds of the video, and a video that already has the size you ask for or more is refused and not charged.
The original and the result are kept for 7 days and then deleted, so download the result when it is ready. The page for the video upscaler is linked below.
What we saw in our test
We made a test clip on purpose. We took 5 seconds from a short film of ours, made it 180 by 320 pixels and compressed it hard, so that it looked pixelated, and then upscaled it to 1080p in the standard mode. Because we still had the original footage, we could measure the result against it. The upscaled video was no closer to the original than the same clip enlarged by a plain resize. It was slightly sharper at the edges, but the blocks were still there, and fine detail was not brought back.
So in this test the upscaler made the video larger and did not clean it. That matches how upscaling works: it can add size, but it cannot recover what was not in the file. We did not test the higher-quality mode. The two pictures on this page are frames from the real result, not edited afterwards.
When upscaling is worth it
Upscale a video when you need a larger frame, for example to fill a bigger screen or to meet a size requirement, and when you accept that the picture will be larger but not new. Do not expect it to fix a heavily compressed video. If the video matters, go back to a better file first, export it again, and keep the original next to anything you make from it.

